Jewers/L20/520/SV/IV

Jewers Doors Limited

Tel: 01767 317 090

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

L20 DOORS / SHUTTERS / HATCHES

520 SLIDING DOORS

Jewers Doors Ltd manufacture a range of specialist use sliding doors. Jewers Doors Ltd can also provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.
Click on the name below to jump to the product and specification details.
Phoenix Kingfisher
Esavian Type 126
Esavian Type 127
Acoustic Door
Blast Resistant Door
Warrior Security Door

Phoenix Kingfisher
Designed for use in helicopter/aircraft hangars, spray booths, multi-vehicle entrance bays, storage and warehouse entrances, bus stations and train depots.
Complementing the Swift and Osprey ranges (see clause 530), the Kingfisher is an insulated straight sliding door. Available in unrestricted configurations - suitable for openings up to 6 metres in height, but with no width limitations.
Multi-leaf formation allows sections of the door to be opened when full width access is not required, thereby reducing opening time, effort and heat loss.
Individual leaves up to a maximum of 4.5 metres wide, with permutations of leaves running on single or multiple tracks.
Insulated and fully weathersealed to minimise heat loss.
Power activation is available for both single and multi-leaf doors, whilst a choice of safety and control options ensure quick and convenient opening and closing.
Key features:
Easy, trouble-free installation.
Top hung or bottom rolling (to suit non-load bearing lintels).
Innovative flat panel, single piece construction.
Available up to 6 metres in height and unlimited width.
Soffit or sidewall mounting.
Low rolling resistance for ease of use.
Simple to repair.
Co-ordinated aluminium hardware.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Manufacturer: Jewers Doors Limited, Stratton Business Park, Biggleswade, Bedfordshire, SG18 8QB. Tel: 01767 317 090. Fax: 01767 312 305. Email: postroom@jewersdoors.co.uk Web: www.jewersdoors.co.uk
Product reference: Phoenix Kingfisher Sliding Folding Doors.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement:
Single leaf top hung / Single leaf bottom rolling
Multi-leaf top hung / Multi-leaf bottom rolling
Opening size: Unlimited width and up to 6 metres high. Maximum size 120m² for top hung and 180m² for bottom rolling. Consult with Jewers Doors for maximum opening sizes for each configuration.
Track system:
Top hung:
Top track – 5mm thick pressed steel ‘C’ section for direct sidewall or soffit mounting. Each leaf to be fitted with a pair of pendent hangers, each with 72mm sealed bearing wheel, two 40mm side thrust sealed bearing wheels and 20mm toughened steel shaft, fully vertically adjustable.
Bottom guide channel – 3mm thick galvanised steel pressing with built-in threshold and chamfered edges. Each leaf to be fitted with a pair of bottom guides of 35mm nylon rollers on 16mm stainless steel shafts.
Bottom rolling:
Bottom track – 16mm wide bright mild steel bar mounted on steel fishplates to be directly into the floor chase. Each leaf to be fitted with a pair of 120mm machined hardened steel rollers mounted in heavy-duty wheel boxes and fitted with sealed for life, maintenance free bearings. Heavy-duty buffer stops to be fitted at the end of the bottom tracks.
Top guide track – 50 x 50 x 3mm galvanised lipped channel (for openings up to 10m wide). Each leaf to be fitted with a pair of 42mm nylon guide wheels running on 16mm stainless steel shaft fitted directly to the top angle. End stops to be fitted within the top tracks.

Door leaf:
Leaf construction:
80 x 60mm or 100 x 65mm steel angles top and bottom to carry running gear.
Panel construction:
Cold rolled galvanised channel frame, with local reinforcement for hardware and covered both sides with galvanised steel sheets. The panel to be injected with CFC free expanded polyurethane insulation during the manufacturing process.
Finish as delivered:
200XT Plastisol outside; Colour: choice of 7 colours (consult with Jewers Doors Ltd for availability of colours and to obtain samples), 200XT Plastisol inside; Colour: White
Polyester powder coated outside; Colour: RAL (choice of any RAL colour), including external hinges and trims, 200XT Plastisol inside; Colour: White
Polyester powder coated both faces in RAL ; Colour: (choice of any RAL colour), including all hinges, handles and trims
Galvanised steel sheets to both faces

Operation:
Manual operation – (all configurations can be manually operated)
Power operation – top hung:
Electric operation using Ovitor TVRFC operators, c/w Westrow Type 1 inverter control panel with Soft start / Stop and an Open-Close-Stop push button.
Power requirements: 240V, 50 Hz, Single Phase
Power operation – bottom rolling:
Electric operation using SEW Eurodrive operators, c/w Westrow inverter control panel with Soft start / Stop and an Open-Close-Stop push button.
Power requirements: 415V, 50 Hz, 3 Phase
Consult with Jewers Doors Ltd for recommendations and details.

Optional power operation equipment:
Low level manual release system
ATR - automatic timed return (if ATR selected, door must be fitted with Photocell or Safety Edge)
Send Receive Photocell
Pneumatic Safety Edge
Extra push button station
Key lockable switch
Digi-key pad
Infra-red remote control
Induction loops (one or both sides of opening)
PIR detector

Ironmongery:
Manual Operation:
Drop bolt and a pair of aluminium pull handle to each leaf – for door leaves less than 12m².
Waist height lever handle to engage a 30 x 10mm steel bar into a floor socket and a pair of heavy duty pull handles to each leaf – for door leaves greater than 12m².

Power Operation:
Independent leaves:
Pair of aluminium pull handle to each leaf – for door leaves less than 12m².
Pair of heavy duty pull handles to each leaf – for door leaves greater than 12m².
Sheaved leaves:
Drive leaf to be fitted with a pair of heavy duty pull handles
Drive motor(s) to automatically lock the door in the closed position
Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Wicket Door - Outward opening with mortice sashlock, low-profile lever furniture and external cylinder
Wicket door with panic bar and external cylinder
Vision Panels:
Size: 680 x 390 acrylic vision panels / 680 x 500 toughened glass vision panels with radiused corners
Mounted: Vertically / Horizontally
Consult with Jewers Doors Ltd for recommendations and details.

Esavian Type 126
Comprising the largest door in the Esavian range (max. height 35 metres, width unlimited) the 126 is not only the most popular and cost-effective form of hangar door, but is designed for use in covered shipbuilding facilities, heavy fabrication shops and other large industrial applications.
The steel-framed construction of these bottom-rolling doors accepts any conventional cladding system to suit widely varying architectural preferences.
Key features:
Robust steel construction bottom rolling, sliding door.
State of the art power operation system with easy controls.
Sophisticated safety devices.
Heights ranging from 6 metres to 35 metres and to unlimited width.
Full weather-sealing.
Unlimited choice of cladding, glazing, reinforced panels and security panel.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement: Single leaf bottom rolling / Multi-leaf bottom rolling
Track system:
Bottom track:
Each leaf fitted with two double-flanged steel track wheels, running on tapered roller bearings, on single or parallel runs of flat bottom rail bottom track, mounted on transverse bearers.
Top track:
Each leaf fitted with minimum of two cylindrical top rollers, (4 rollers onto an articulated top beam on wider leaves), running on Universal ‘I’ beam top guide tracks, suspended from the roof structure.

Door leaf:
Leaf frames:
To be designed in accordance with British Standards relating to the design of steel structures, with all structural members fabricated from standard hot rolled steel sections. Cladding rails typically comprise cold rolled steel sections, fully shop fabricated ready for site assembly.
After fabrication, all main structural sections to be shot-blasted and painted as specified.
Door cladding:
Leaves may be sheeted in any readily available cladding system. Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation:
Powered operation:
Individually operated:
Individual leaves to be fitted with a drive unit, driving a single bottom wheel. Leaves to be free to move anywhere along the clear length of track.
Cable sheaving system:
The Master leaf (leading leaf of a group) to be fitted with one or two drive units, driving the bottom wheel(s). The Slave leaves (trailing leaves) to be controlled by the Master Leaf. Each leaf to run on a separate track and be linked to the adjacent leaf by the cable sheaving system, fitted onto the internal face of the door at high level.
Drive units:
Drive units to comprise a brake motor, driving a bottom wheel through a gearbox, disengaging clutch and chain drive. Drive units to be fitted within the thickness of the door leaf and fully enclosed behind a hinged access panel.
Control:
Push button control, with automatic stopped in the open or closed positions by inductive proximity sensors.
Power supply: 415 volts 3 phase 50Hz.
Handwind operation:
Each leaf to be moved using a crank handle inserted at waist height into the front of the leaf.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Reinforced bottom panels
Glazing panels
Consult with Jewers Doors Ltd for recommendations and details.

Esavian Type 127
A mid-range bottom rolling, sliding door utilises tough, insulated panels to provide modular, visually appealing leaves.
With a maximum height of 12 metres and unlimited width, the 127 is designed for smaller aircraft hangars or larger vehicle openings.
Key features:
Unique ridged composite panel cladding system.
Single rolled steel channel frame.
Single or multi-track format, bottom rolling.
High insulation values with full weather-sealing.
Manual, hand-wind or power operation.
Heights up to 12 metres with unlimited width.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement: Single leaf bottom rolling / Multi-leaf bottom rolling
Track system:
Bottom track:
Each leaf fitted with two heavy duty steel track wheels, running on tapered roller bearings, on parallel runs of flat bottom rail bottom track, mounted on transverse bearers.
Top track:
Each leaf fitted with minimum of two rollers, running on pre-lubricated bearings on top guide tracks.

Door leaf:
Leaf frames:
To be designed in accordance with British Standard 5950, with all structural members fabricated from standard rolled steel channel sections, with all joints drilled ready for site assembly.
After fabrication, all main structural sections to be shot-blasted and painted as specified.
Door cladding:
Insulated composite panels, individually fabricated from a cold rolled galvanised channel frame and covered both sides with galvanised, Plastisol coated or PVF2 coated steel sheets. The panel to be injected with expanded polyurethane insulation during the manufacturing process.
Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation:
Manual operation – for smaller doors up to 1500kg per leaf.
Handwind operation:
Each leaf to be moved using a crank handle inserted at waist height into the front of the leaf.
Powered operation:
Individually operated:
Individual leaves to be fitted with a drive unit, driving a single bottom wheel. Leaves to be free to move anywhere along the clear length of track.
Cable sheaving system:
The Master leaf (leading leaf of a group) to be fitted with one or two drive units, driving the bottom wheel(s). The Slave leaves (trailing leaves) to be controlled by the Master Leaf. Each leaf to run on a separate track and be linked to the adjacent leaf by the cable sheaving system, fitted onto the internal face of the door at high level.
Drive units:
Drive units to comprise a brake motor, driving a bottom wheel through a gearbox, disengaging clutch and chain drive. Drive units to be fitted within the thickness of the door leaf and fully enclosed behind a hinged access panel.
Control:
Push button control, with automatic stopped in the open or closed positions by inductive proximity sensors.
Power supply: 415 volts 3 phase 50Hz.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Vision panels
Consult with Jewers Doors Ltd for recommendations and details.

Acoustic Door
A sound engineered solution designed for use in all situations where noise suppression is a critical factor. Available in bifolding, sliding folding, horizontal sliding, vertical lift or side hinged configurations, the Acoustic door (from personnel access up to aircraft hangar size) feature The Jewers’ Acoustic Matrix System that reduces noise between 27 and 48 dB.
Typical applications include power stations, pumping stations and heavy equipment rooms, engine test cells, control rooms and machinery enclosures, theatres, leisure centres, schools, workshops, cinemas and film studios etc.
Key features:
Back to Special Applications
Unique Acoustic Matrix System
Complete spectrum of configurations
Large openings a speciality
Aesthetically pleasing and highly durable
Manual or power operation
Full design and build package
Specialist installation teams
Jewers Acoustic Doors have been tested and certified by the University of Salford School of Acoustics and Electronic Engineering.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement:
Single leaf top hung / Single leaf bottom rolling
Multi-leaf top hung / Multi-leaf bottom rolling
Track system: Consult with Jewers Doors Ltd for recommendations and details.

Door leaf: Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation: Consult with Jewers Doors Ltd for recommendations and details.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Vision panels
Consult with Jewers Doors Ltd for recommendations and details.

Blast Resistant Door
A range of doors designed to minimise explosive risks, utilising the latest knowledge and cutting edge of technology.
Specifically designed to cope with explosive or volatile chemical eruptions, the doors can be made to resist shock pressures between 10 and 10,000kN/m² (1.5 to 1450 psi). There is a choice of single or double leaf side hinged, sliding, folding or bifolding configurations, all available with integrated high security locking systems.
Key Features:
Back to Special Applications
Wide variety of configurations and sizes
Large range of blast pressures
Full design and build package
Fire assessments available
Integrated high security locking system
Blast proof glazing available
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement:
Single leaf top hung / Single leaf bottom rolling
Multi-leaf top hung / Multi-leaf bottom rolling
Track system: Consult with Jewers Doors Ltd for recommendations and details.

Door leaf: Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation: Consult with Jewers Doors Ltd for recommendations and details.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Vision panels
Consult with Jewers Doors Ltd for recommendations and details.

Warrior Security Door
The Warrior sliding security door is designed to withstand terrorist or vandal attacks using large jemmies, high speed disc saws, oxyacetylene torches or ‘hooligan bars’.
The doors are SEAP Class 3 approved for UK Government use.
Warrior Sliding Doors can be provided for openings of unlimited width and height.
The Warrior Security Door is manufactured to specific requirements.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement: Consult with Jewers Doors Ltd for recommendations and details.
Track system: Consult with Jewers Doors Ltd for recommendations and details.

Door leaf: Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation: Consult with Jewers Doors Ltd for recommendations and details.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements: Consult with Jewers Doors Ltd for recommendations and details.