Jewers/L20/530/SV/IV

Jewers Doors Limited

Tel: 01767 317 090

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

L20 DOORS / SHUTTERS / HATCHES

530 SLIDING FOLDING EXTERNAL DOORS

Jewers Doors Ltd manufacture a range of specialist use sliding doors. Jewers Doors Ltd can also provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.
Click on the name below to jump to the product and specification details.
Phoenix Swift
Phoenix Osprey
Esavian Flatfold
Esavian Type 1200
Acoustic Door
Blast Resistant Door
Samurai Security Door

Phoenix Swift
Ideally suited for use in fire and ambulance stations, water and sewage treatment plants, train maintenance sheds, vehicle workshops, loading docks and all other industrial applications.
Swift doors can be power operated (opening in under 7 seconds) using an electro-hydraulic drive system, available with a choice of safety and control options. Manual operation is effortless – one person can fully open or close a 24m² door in less than 10 seconds.
Door thickness: 52 mm.
U-value of door: 0.7W/m²/deg.C.
Weight: 18-20 kg/m².
Doors are side hung, with no bottom channel and all versions fold behind the opening, requiring minimal side and headroom. 180 mm sideroom and 150 mm headroom for both manual and power operated versions.
Fully weathersealed for low heat and very low air loss, and incorporating full height finger-nip protection between the leaves for user safety.
Key features:
Flat panel, single piece insulated construction.
Low heat and air loss.
Ultra quick operation combined with building security.
Very few moving parts – all self lubricating.
Routine maintenance does not require an expensive Repair & Maintenance Company.
Full powder coated finishes available.
Complies with latest CEN regulations.
Can be fitted into very low sideroom, low headroom openings.
Manual operation:
Side hung bi-parting door available with any combination of 1, 2 or 3 leaves folding to one or both sides. 7 configurations available: 2+0, 2+1, 3+0, 3+1, 2+2, 3+2 or 3+3. leaves.
Maximum width: 5700 mm – 3+3 configuration.
Maximum height: 6000 mm. – 2+2 configuration.
Maximum door area: 24m² - see technical literature for door configurations/max. door areas.
Furniture and locking: Low-level floor bolt and aluminium pull handle fitted internally to each leaf as standard. Passive leaves to 3+1 and 3+3 configurations filled with full height espagnolette bolt. No external furniture.
Optional locking
Surface mounted floor or full height espagnolette bolts with integral pull handle at apex joints.
Floor Shoe: 2+2 leaf doors can be fitted with a floor shoe at the centre of the opening instead of drop bolts, so that leaves automatically engage when closed and prevent forced entry.
Odd leaf (either single leaf in 2+1, or third leaf in 3+2, etc) to be used as full height personnel door. Fitted with mortice sashlock, pair of black Hewi lever handles and external cylinder.
Electric operation:
Side hung fast acting bi-folding door available with 2 leaves folding to one or both sides.
Maximum widths: 2+2 - 4750 mm, 2+0 – 2350 mm.
Maximum height: 6000 mm.
Maximum door area: 24 m².
Power Operation: FAAC 560 electro-hydraulic drive unit is mounted at high level on each pair of leaves. Telescopic drive arm fitted between operator and jamb. FAAC 455D programmable control panel with Run-Stop push button.
Power requirements: 240V, 50 Hz, Single Phase.
High-level hydraulic lock within operator holds door securely in open or closed positions. Manual release screw on drive body enables manual operation. Drive units fitted with built-in anti-crush device to prevent accidental crushing during closing. Aluminium pull handle fitted to each leaf as standard.
Options:
Low-level manual release system for emergency manual operation of door.
Low-level floor bolts for additional security - interlocked to drive system.
Optional control equipment:
ATR - automatic timed return. Door will close automatically after a preset pause period (must have a photocell or safety edge if operation set for ATR)
Key lockable switch.
Digi-key pad – 4056 combinations.
Infra-red remote control.
Induction loops (one or both sides of opening).
Optional Safety Features
Send and Receive photocell.
Pneumatic Safety Edges in leading edges – full height.
Standard finishes:
External sheet in factory finished Dobel 200XT Plastisol in choice of 7 colours, White, Goosewing Grey, Cornflower Blue, Ocean Blue, Olive Green, Poppy Red or Golden Yellow. Internal sheet in Dobel 200XT Plastisol in White. All hardware is anodised aluminium / zinc plated as standard. Aluminium trims are mill finished.
Optional finishes:
External sheets to be Polyester Powder Coated to any RAL colour, or,
Both sheets and all hardware and aluminium trims to be Polyester Powder coated to any RAL colour, or,
Both sheets to be finished in pre finished galvanised steel sheets.
Wicket Door:
Outward opening with mortice sashlock, low-profile lever furniture and external cylinder. 1½ pairs stainless steel hinges and with hidden overhead door stay.
Options: Emergency escape wicket - as above, but with internal panic bar.
Vision Panels:
Acrylic - 680 x 390 mm double glazed toughened acrylic in black plastic security frame with square corners.
Toughend Glass – 680 x 500 mm double glazed toughened glass in black aluminium frame with 60 mm radiused corners.
Both can be mounted horizontally or vertically, depending on panel width. Maximum 2 vision panels per leaf.
Sub-Frame:
Door must be fixed to a flush steel goalpost frame - not included as standard.
Face fixed - 125 x 75 x 8 mm steel angle goalpost frame for fixing to the back of a brick or blockwork opening. Prime finished.
Between walls - 200 x 100 x 5 mm steel box section frame for fixing between brick or blockwork opening. Prime finished.
Optional finish – full polyurethane paint finish to match door colour.
Top track and guide rollers:
Top guide track: 50 x 50 x 3 mm galvanised channel mounted with adjustable steel brackets.
Top guide rollers: 42 mm diameter nylon guide wheels running on 16 mm diameter stainless steel shafts mounted in anodised aluminium fittings.
Threshold:
A 120 x 10 mm full width galvanised steel threshold plate is fitted to the floor on external doors to prevent water ingress and to protect bottom seals during. Both edges can be chamfered as an option. A bottom channel is not required.
Seals:
EPDM rubber seals are fitted at threshold, jambs and all joints between leaves. A brush seal is fitted at the head. All vertical joints provide full finger trap protection and the overall door is fully weather sealed. 35mm brush seals to be fitted at the floor when threshold not required.
Hinges:
The door weight is carried at the jambs, on purpose designed hinges, which offer both sideways and vertical adjustment of leaves. Apex hinges are extruded anodised aluminium fittings with 16 mm diameter stainless pins. Bottom apex hinges allow vertical adjustment of leaves. All hinges have self-lubricating Igus bushes.

Manufacturer: Jewers Doors Limited, Stratton Business Park, Biggleswade, Bedfordshire, SG18 8QB. Tel: 01767 317 090. Fax: 01767 312 305. Email: postroom@jewersdoors.co.uk Web: www.jewersdoors.co.uk
Product reference: Phoenix Range Swift Sliding Folding Door.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement: Side-hung, insulated bifold door;
Configuration: Two / Two+Two / Three / Two+One / Three+One / Three+Two / Three+Three
Leaves to one side / Leaves to each side
Opening size: Up to 5.7 metres wide and up to 6 metres high. Maximum size 24m². Consult with Jewers Doors for maximum opening sizes for each configuration.
Track system:
Top guide track: 50 x 50 x 3 mm galvanised channel mounted with adjustable brackets.
Top guide rollers: 42 mm diameter nylon guide wheels running on 16 mm diameter stainless steel shafts set in anodised aluminium fittings.
Threshold plate: 120 x 10 mm standard / chamfered galvanised steel threshold plate fitted to the floor on external doors to prevent water ingress.
Floor shoe: Floor shoe at centre of the opening. (2+2 doors only)

Door leaf:
Thickness: 52 mm.
Frame:
Steel frame by others.
125 x 75 x 8 mm steel angle goalpost frame for fixing to the back of a brick or blockwork opening. Prime finished.
200 x 100 x 10 mm steel angle goalpost frame for fixing between brick or blockwork opening. Prime finished.
Hinges:
Jambs hinges to allow both sideways and vertical adjustment of leaves.
Apex hinges to be extruded anodised aluminium fittings with 16 mm diameter stainless pins. Bottom apex hinges to allow vertical adjustment of leaves.
Seals:
EPDM rubber seals fitted at threshold, jambs and all joints between leaves. A brush seal is fitted at the head. All vertical joints provide full finger trap protection and the overall door is fully weather sealed.
Finish as delivered: Select from:
200XT Plastisol outside; Colour: choice of 7 colours (consult with Jewers Doors Ltd for availability of colours and to obtain samples), 200XT Plastisol inside; Colour: White
Polyester powder coated outside; Colour: RAL (choice of any RAL colour), including external hinges and trims, 200XT Plastisol inside; Colour: White
Polyester powder coated both faces in RAL ; Colour: (choice of any RAL colour), including all hinges, handles and trims
Galvanised steel sheets to both faces

Operation:
Manual operation – (all configurations can be manually operated)
Electric operation – (only 2+0 and 2+2 configurations) using FAAC 560 electrohydraulic operators, c/w FAAC 455D control panel and Run / Stop push button.
Power requirements: 240V, 50 Hz, Single Phase

Optional power operation equipment:
Low level manual release system
ATR - automatic timed return (if ATR selected, door must be fitted with Photocell or Safety Edge)
Send Receive Photocell
Pneumatic Safety Edge
Extra push button station
Key lockable switch
Digi-key pad
Infra-red remote control
Induction loops (one or both sides of opening)
PIR detector

Ironmongery:
Manual Operation:
Drop bolt and pull handle to each leaf (as standard)
Full height espagnolette bolt to passive leaf (3+1 and 3+3 leaf configurations only)
Full height espagnolette bolt to each pair of leaves (optional in place of drop bolts)
Hewi lever furniture to odd leaf
Consult with Jewers for further details

Power Operation:
Drive motor holds door closed (standard)
Lever operated floor bolts interlocked to drive system

Other requirements:
Wicket Door - Outward opening with mortice sashlock, low-profile lever furniture and external cylinder
Wicket door with panic bar and external cylinder
Vision Panels:
Size: 680 x 390 acrylic vision panels / 680 x 500 toughened glass vision panels with radiused corners
Mounted: Vertically / Horizontally

Phoenix Osprey
Designed for helicopter/aircraft hangars, spray booths, multi-vehicle entrance bays, large goods/vehicle bays and workshops, the Osprey multi-leaf folding door is fully insulated and specially suited for larger span openings.
Available in a variety of configurations to accommodate openings of unlimited width and up to 6 metres in height (or more by special design).
Multi-leaf construction allows the door to be partially opened when full aperture access is not required.
Manual doors can fold within or completely clear of the opening, requiring minimal side and headroom.
Fully weathersealed for low heat loss and incorporating full height finger-nip protection between the leaves for operator safety.
Power operation is available for openings up to 18 metres wide, with a choice of safety and control options.
Key features:
Sealed-for-life, self-lubricating bearings.
Flat panel, single piece insulated construction.
Soffit or sidewall mounting.
Galvanised bottom guide track with corrosion-proof guides.
Co-ordinated aluminium hardware.
Complies with latest CEN regulations.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement: Top-hung, flat panelled multi-leaf sliding folding door
Opening size:
Unlimited width for manually operated and up to 20 metres width for power operated.
Maximum height 6m and maximum size 50m² for door to one side arrangement and 100m² for door bi-parting arrangement. Consult with Jewers Doors for maximum opening sizes for each configuration.
Track system:
Top track:
5mm thick pressed channel for direct side wall or soffit mounting with pendant hangers to each leaf, each with a 72mm sealed bearing wheel, two 40mm side thrust sealed bearing wheels and toughened steel shaft, fully vertically adjustable.
Bottom guide channel:
3mm thick galvanised steel pressing with built-in threshold and chamfered edges. Bottom guides to be 35mm nylon rollers running on 16mm stainless steel shafts.

Door leaf:
Thickness: 52 mm.
Leaf construction:
Cold rolled galvanised channel frame, with local reinforcement for hardware and covered both sides with galvanised steel sheets. The panel to be injected with CFC free expanded polyurethane insulation during the manufacturing process.
Hinges:
Hinges to be extruded anodised aluminium fittings with 16mm stainless steel pins with self-lubricating bushes.
Seals:
EPDM rubber seals fitted at threshold, jambs and all joints between leaves. A brush seal is fitted at the head. All vertical joints provide full finger trap protection and the overall door is fully weather sealed.
Finish as delivered: Select from:
200XT Plastisol outside; Colour: choice of 7 colours (consult with Jewers Doors Ltd for availability of colours and to obtain samples), 200XT Plastisol inside; Colour: White
Polyester powder coated outside; Colour: RAL (choice of any RAL colour), including external hinges and trims, 200XT Plastisol inside; Colour: White
Polyester powder coated both faces in RAL ; Colour: (choice of any RAL colour), including all hinges, handles and trims
Galvanised steel sheets to both faces

Operation:
Manual operation – (all configurations can be manually operated)
Electric operation using Ovitor TVRFC operators, c/w Westrow Type 1 inverter control panel with Soft start / Stop and an Open-Close-Stop push button.
Power requirements: 240V, 50 Hz, Single Phase.

Ironmongery:
Manual Operation:
Drop bolt and pull handle fitted internally to each pair of leaves, with odd leaf fitted with drop bolt and aluminium handle as standard.
Espagnolette bolt – waist height lever handle to engage a 30 x 10mm steel bar into a socket in the floor and at the head and fitted internally at the intermediate joints between leaves.
Active leaf – Single leaf used as full height pass door. Standard furniture to comprise black lever handles, mortice sash lock, external Europrofile cylinder lock with internal thumb turn.
Consult with Jewers for further details

Power Operation:
Drive motor to automatically lock the door in the closed position. Low-level manual release chains to allow each motor to disconnect for hand operation.
Heavy-duty pull handle to be fitted internally to the leading edge leaf for manual operation.
Espagnolette bolt – waist height lever handle to engage a 30 x 10mm steel bar into a socket in the floor and at the head and fitted internally at the intermediate joints between leaves and interlocked with motor.

Esavian Flatfold
A mid-range, steel framed, bottom rolling, folding door, designed for use in small aircraft and helicopter hangars.
For openings up to 8 m high and up to 30 m in width.
Key features:
Bottom rolling on single track
Minimal stacking space
Optional glazing and personnel doors
Heights up to 8 metres
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement: Bottom rolling, insulated panelled multi-leaf sliding folding door
Track system: Consult with Jewers Doors Ltd for recommendations and details.

Door leaf:
Leaf frames:
Cold rolled galvanised steel, lipped channels as stiles, with galvanised channel rails and braces.
Sliding posts:
Rectangular hollow steel sections, hot dipped galvanised after fabrication. Leaves to be hinged to the uprights using very heavy duty offset zinc plated hinges.
Sliding posts to be fitted with galvanised steel pressings which incorporate vertical EPDM compressible weather seals.. The joints between the leaves to be sealed with double EPDM compressible seals mating with extruded aluminium trim.
Door cladding:
Insulated composite panels, individually fabricated from a cold rolled galvanised channel frame and covered both sides with galvanised, Plastisol coated or PVF2 coated steel sheets. The panel to be injected with expanded polyurethane insulation during the manufacturing process.
Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation:
Powered operation:
Power mullion:
Each power mullion to comprise a vertical fabricated box assembly to house the drive motor and electrical equipment. The bottom of each power mullion to be fitted with two track wheels, with four guide rollers fitted to the top. The doors to be driven by rotation of the winch drums engaging with a static steel cable within the floor track.
Control:
Control panel for each drive unit to be mounted within the power mullion. Standard equipment to include a secondary low voltage control circuit, an audible alarm incorporating a time delay and a terminal for push buttons and limit switches.
Control panels to be fitted with an inverter-controlled, variable speed drive system. Braking to be controlled by the inverter and its brake resistor. Mechanical brake to be applied only when door is at rest.
Power requirements: Consult with Jewers Doors Ltd for recommendations and details.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Vision panels
Consult with Jewers Doors Ltd for recommendations and details.

Esavian Type 1200
An all-aluminium construction, bottom rolling, folding door with a long track record of durability in aircraft and helicopter hangars, even in the harshest climates.
Suiting openings from 8 metres up to 18 metres high and unlimited width, the 1200 is at an advantage in situations where door stacking space is at a premium.
Doors may be either ‘fixed’, where the group of leaves is fixed to a jamb post at one end and a power mullion fitted to the other, or ‘fully floating’, where both ends of the group of leaves is fitted with a power mullion allowing the whole group to move anywhere along the length of the track.
Key features:
Robust, durable marine grade aluminium construction
Power operation for ease of use
Bottom rolling on single track
Minimal stacking space
Fully factory finished
Optional glazing and personnel doors
High standard of weather-sealing giving extreme longevity
Heights from 8 metres to 18 metres plus unlimited width
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement:
Fixed bottom rolling, insulated panelled multi-leaf sliding folding door
Fully floating bottom rolling, insulated panelled multi-leaf sliding folding door
Track system:
Bottom track:
Two parallel members of a flat bottom rail, mounted together on transverse bearers for fixing into the concrete foundation, prior to casting into position. When fixed, the rails to finish flush with the floor level.
Top guide tracks:
Typically, a pair of rolled steel channels, mounted back to back with a specified distance between.
Consult with Jewers Doors Ltd for recommendations and details.

Door leaf:
Leaf construction:
Folding door leaves to be framed from extruded aluminium sections welded together and clad on both faces with 1.2mm thick, shallow profiled aluminium sheets, secured to the frame with rivets and sealed with pins. The panel cavity to be packed with 50mm thick polyurethane slabs.
Pairs of folding door leaves to be hinged together and to sliding posts and power mullions with cast aluminium hinges. Hinges to be fitted with Oilite bushes and plated steel pins. The lowest hinge at each joint to be fitted with a loadbearing thrust race.
Sliding posts:
Heavy duty extruded aluminium anchor shaped sections, each fitted at the bottom with a load carrying EN8 steel bottom roller and at the top with zinc-plated guide rollers.
Fixed end posts:
Heavy duty extruded aluminium half-anchor shaped sections, fixed to steel jamb posts supplied by others.
Weatherseals:
All vertical joints between leaves, sliding posts and power mullions to be fitted with twin EPDM draught excluders.
Nylon brush seals, retained in aluminium extrusions to be fitted at the head and floor.
At the meeting point between pairs of power mullions, large wrap round EPDM butt seals set in aluminium extrusions to be fitted.
Finish as delivered:
Stucco-embossed mill finished
Etched and primed for site painting
Polyester powder coated
Consult with Jewers Doors Ltd for availability of colours and to obtain samples.

Operation:
Powered operation:
Power mullions:
Each power mullion to comprise a fabricated aluminium box assembly, clad to match the door leaves, to house the drive motor with electromagnetic brake, which drives a winch drum through a heavy duty gearbox. The doors to be driven by rotation of the winch drums engaging with a static steel cable within the floor track and at high level.
Control:
Push button control panels to be mounted on the internal and external faces of each power mullion, with the electrical control equipment housed within a panel inside the power mullion.
Solid state limit switches to be fitted at low level inside the mullions to automatically stop the door in the fully open or fully closed positions.
Access to the drive unit and electrical equipment to be through a large access door on the rear face of the power module.
Standard equipment to include an audible alarm to sound for a short period before the door begins to move. Flashing beacons may also be fitted.
The leading edge of each power mullion to be fitted with a full height pneumatic safety edge. Impact on the safety edge to prevent the door from being restarted for a specified period of time.
Power supply: 415 volts 3 phase 50Hz.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Reinforced bottom panels
Glazing panels
Consult with Jewers Doors Ltd for recommendations and details.

Acoustic Door
A sound engineered solution designed for use in all situations where noise suppression is a critical factor. Available in bifolding, sliding folding, horizontal sliding, vertical lift or side hinged configurations, the Acoustic door (from personnel access up to aircraft hangar size) feature The Jewers’ Acoustic Matrix System that reduces noise between 27 and 48 dB.
Sizes: For openings up to 7 metres high and 10 metres wide.
Typical applications include power stations, pumping stations and heavy equipment rooms, engine test cells, control rooms and machinery enclosures, theatres, leisure centres, schools, workshops, cinemas and film studios etc.
Key features:
Back to Special Applications
Unique Acoustic Matrix System
Complete spectrum of configurations
Large openings a speciality
Aesthetically pleasing and highly durable
Manual or power operation
Full design and build package
Specialist installation teams
Jewers Acoustic Doors have been tested and certified by the University of Salford School of Acoustics and Electronic Engineering.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement:
Top hung, insulated panelled multi-leaf sliding folding door
Bottom rolling, insulated panelled multi-leaf sliding folding door
Track system: Consult with Jewers Doors Ltd for recommendations and details.

Door leaf: Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation: Consult with Jewers Doors Ltd for recommendations and details.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Vision panels
Consult with Jewers Doors Ltd for recommendations and details.

Blast Resistant Door
A range of doors designed to minimise explosive risks, utilising the latest knowledge and cutting edge of technology.
Specifically designed to cope with explosive or volatile chemical eruptions, the doors can be made to resist shock pressures between 10 and 10,000kN/m² (1.5 to 1450 psi). There is a choice of single or double leaf side hinged, sliding, folding or bifolding configurations, all available with integrated high security locking systems.
Key Features:
Back to Special Applications
Wide variety of configurations and sizes
Large range of blast pressures
Full design and build package
Fire assessments available
Integrated high security locking system
Blast proof glazing available
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Door leaf: Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation: Consult with Jewers Doors Ltd for recommendations and details.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements:
Personnel doors
Vision panels
Consult with Jewers Doors Ltd for recommendations and details.

Samurai Security Door
The Samurai sliding folding security door is designed to withstand terrorist or vandal attacks using large jemmies, high speed disc saws, oxyacetylene torches or ‘hooligan bars’.
The doors are SEAP Class 3 approved for UK Government use.
Warrior Sliding Doors can be provided for openings of unlimited width and height.
The Warrior Security Door is manufactured to specific requirements.
Consult with Jewers Doors Ltd technical literature for details. Jewers Doors Ltd can provide a complete service, including design, opening preparation, installation, maintenance and servicing and it is recommended that they are consulted early in the design process.

Performance: Consult with Jewers Doors Ltd for recommendations and details.

Arrangement: Consult with Jewers Doors Ltd for recommendations and details.
Track system: Consult with Jewers Doors Ltd for recommendations and details.

Door leaf: Consult with Jewers Doors Ltd for recommendations and details.
Finish as delivered: Consult with Jewers Doors Ltd for recommendations and details.

Operation: Consult with Jewers Doors Ltd for recommendations and details.

Ironmongery: Consult with Jewers Doors Ltd for recommendations and details.

Other requirements: Consult with Jewers Doors Ltd for recommendations and details.